Board-Club official representative of AIRUSH in Ukraine.

Buying an AIRUSH DIAMOND 2017 kite in Board Club stores in Kyiv, Kharkov, Odessa or ordering on our website means becoming part of the surf culture, getting the best price and guarantee manufacturer for all goods presented in our stores!

Next Gen Dyneema Load Frame

Airush pioneered the Dyneema Load Frame. There are several advantages at once, and at the same time without compromising the total weight of the kite. Lightweight and strong mesh carries the entire load, preventing stretching of the fabric of the canopy and, at the same time, a significant deterioration in flight performance. Thanks to the Dyneema carcass, the canopy became stiffer, which improved the responsiveness and control of the kite. In hard crashes, damage is minimized.

<

Technoforce D2

Techno FORCE™ D2 premium synthetic material is minimally susceptible to stretch and UV damage. Combined with the Dyneema Load Frame, it provides the kite with unparalleled strength and durability.

<

V3. 2 Bridle

Incredibly efficient and elegant, the kite's leading edge support system combines several functions at once. It provides the kite with precise control even when the trim is fully tightened, which significantly affects the overall safety and expands the kite's capabilities when riding in large areas.m wind range. Through the V3 line system, very little load is transferred from the kite to the control bar. But it is quite enough to understand in what part of the wind window the kite is at the moment without looking at the kite. The whole secret is in the correct location of the points of attachment of the system to the leading edge of the kite and in the use of roller blocks.

Weight adjustment on the bar

All Airush SLE kites (kites with leading edge support) have the ability to adjust bar weight coming from the kite. The V3 line system is attached to the leading edge of the kite in the same way we attach lines to a kite. By moving the V3 system to adjacent free knots on the front of the kite, you can change the load on the bar as you wish - quickly and conveniently.

<

XL Inflate /Deflate

It's much easier and faster to inflate/deflate the kite through the oversized valve. This becomes especially noticeable when pumping the kite. Less effort can be applied, and therefore fewer broken pumps!

<

Airush Bumpers

To reduce wear and increase the kite's durability, protective pads are sewn all over the curves of the front balloon.< /p>

<

Security handles

Every kiter out on the water needs to know how to deal with an emergency on the water. For cases when the kite can no longer be controlled by the control bar, on all Airush kites, handles for self-evacuation to the shore are sewn closer to the ends of the wing.

<

Single Point Inflation System

The whole inflatable frame of the kite is integrated into one system and is inflated through one valve. The air tubes connecting the cylinders to each other have an increased diameter. This not only inflates the kite evenly and quickly, but also deflates very quickly for a compact package. And due to the thickened walls, the tubes are less prone to fracture.

<

Rear line adjustment

All Airush kites have the ability to quickly and easily adjust the kite's behavior to suit your individual preferences. If the ends to which the control lines are attached are moved closer to the HIGH sign, the load on the control bar will increase, and the speed of the kite turn will decrease. Sometimes this option helps when riding in very strong winds on small kites, 5-7 m. And if you move the tips closer to the trailing edge, then the pressure coming from the kite to the bar decreases, and the wing turns become faster.

<

Airush Pulleys

Made of Zytel® composite material, the main components of which are fiberglass and crushed kevlar. Zytel® is excellent at high temperatures and does not become brittle at low temperatures. Impact and abrasion resistant. Airush roller blocks have been specially designed for use on your own kites. The holes in the block are designed so that the sling passing through them does not wear out. The tensile strength of each block is 550 kg.

<

Kevlar reinforcements

All parts of the kite that are most susceptible to abrasion are protected by Kevlar inserts. Kevlar, which is used in the manufacture of bulletproof vests, as well as in the aviation and space industries, reliably protects the kite and at the same time does not affect the overall weight at all. Kevlar fabric is very light, one meter of it weighs only 50-60 grams.

<

Includes:
- Dome
- Backpack
- Repair kit